AILESEN(CHANGZHOU)POWER TECHNOLOGY CO.,LTD

Fuel Valve Test Pump Unit, it is recommended to contact professionals for maintenance work, but if you pay more attention in your daily life and standardize the operation, you can also avoid its failure to a certain extent. Changzhou Allison will summarize for everyone Standardized operation of the six-point fuel injector test bench.

1. In the process of operating the controller, the operator should wear safety glasses.

2. Use an independent dedicated socket and perform reliable grounding. The injector test bench supports high-speed solenoid valve common rail injectors, and supports the third-generation high-pressure common rail technology piezoelectric crystal common rail injector; 6-channel common rail injector; supports multiple rail pressures Sensor; intelligent PID algorithm, more accurate pressure control; short-circuit protection in both hardware and software, the machine is more reliable; safety protection design prevents misoperation by operators, making it safer to use. The power cord of this controller is a three-wire plug, which is connected to a standard three-wire socket, please ensure reliable grounding;

3. If the power supply voltage is unstable, please connect the controller to the power supply regulator for use.

4. Regularly inspect whether the AC power cord is damaged, and whether there is dust accumulation on the power plug or power socket.

 5. If the controller appears abnormal, or emits abnormal sounds or smells, or the controller becomes too hot to touch, please stop using it immediately (use) and unplug the AC power cord and all other plugs from the power socket. Connection line.

 6. If the controller fails, please contact the after-sales service personnel to get the necessary help.

Fuel Valve Test Pump Unit manufacturer